How do I change the color and brightness of the i-CHONY ch-59156 Butterfly 3D Illusion Lamp? (i-CHONY ch-59156 Butterfly 3D Illusion Lamp User Manual)

Answer

manuals.plus

Jul 30, 2024 - 02:32 AM

To change the color and brightness of the i-CHONY ch-59156 Butterfly 3D Illusion Lamp, you can use either the touch control or the remote control. Here are the steps to adjust the settings:

Using the Touch Control:
1. Make sure the lamp is connected to a power source (either 3 AA batteries or USB).
2. Locate the touch control button on the lamp's base.
3. Tap the touch control button to turn on the lamp.
4. To change the color, touch the touch control button repeatedly until you reach your desired color. The lamp has 16 different colors to choose from.
5. To adjust the brightness, touch and hold the touch control button. The lamp will gradually increase or decrease in brightness. Release the button when you reach your desired brightness level.
6. To turn off the lamp, tap the touch control button again.

Using the Remote Control:
1. Make sure the lamp is connected to a power source (either 3 AA batteries or USB).
2. Point the remote control towards the lamp's receiver.
3. Press the "ON" button on the remote control to turn on the lamp.
4. To change the color, press the corresponding colored button on the remote control. There are 16 different colors to choose from.
5. To adjust the brightness, press the "Turn up" or "Turn down" buttons on the remote control.
6. To turn off the lamp, press the "OFF" button on the remote control.

Note: The remote control also has mode buttons (FLASH, STROBE, FADE, SMOOTH) that control different lighting effects. You can experiment with these modes to create different atmospheres.

Please refer to the user manual for more detailed instructions and illustrations on using the touch control and remote control for color and brightness adjustments.