User Manual Q&AAnswer
Jul 30, 2024 - 02:29 AM
To change the color and brightness of the AZIMOM Touch Remote Control Illusion lamp, you have two options: using the touch-sensitive button on the lamp's base or using the remote control.
Here are the step-by-step instructions:
1. Using the touch-sensitive button:
a. Make sure the lamp is connected to the power source (USB cable or batteries) and turned on.
b. Locate the touch-sensitive button on the lamp's base.
c. Tap the touch-sensitive button to turn on the lamp and cycle through the available colors.
d. To adjust the brightness, press and hold the touch-sensitive button until the desired brightness level is reached.
2. Using the remote control:
a. Make sure the lamp is connected to the power source (USB cable or batteries) and turned on.
b. Point the remote control towards the lamp.
c. Press the "ON/OFF" button on the remote control to turn on the lamp.
d. To change the color, press the "16 Colors" button on the remote control to cycle through the available colors.
e. To adjust the brightness, use the "Brightness" button on the remote control. Press the "+" button to increase the brightness and the "-" button to decrease the brightness.
By following these instructions, you should be able to easily change the color and brightness settings of your AZIMOM Touch Remote Control Illusion lamp.
Add New Comment