User Manual Q&AAnswer
Jul 30, 2024 - 12:32 AM
To install the Elsent lsent Plug-in LED Night Light, please follow these steps:
1. Take the Elsent LED Night Light out of the box.
2. Identify the spot in your bedroom or the room of your children where you want to install the night light for soft lighting at night.
3. Make sure the night light is securely connected by plugging it into any standard electrical outlet.
4. Position the night light in a way that it gives off the best light while still leaving room for the second outlet.
5. Let the built-in light sensor work, which will allow automatic operation based on the lighting conditions.
6. To test the night light, cover the sensor to make it look like it's dark and observe if the night light turns on as expected.
7. If needed, you can adjust the position of the night light to optimize lighting and outlet access.
8. The Elsent LED Night Light will turn on automatically, making it easy to sleep at night.
9. It is recommended to check the night light's performance on a daily basis to ensure it continues to work properly.
10. If you encounter any problems during setup or use, refer to the user manual for troubleshooting instructions.
11. Avoid placing the night light in areas with high temperatures or excessive moisture.
12. Ensure there is enough airflow around the night light and the room doesn't get too hot.
13. For enhanced safety and visibility, you may consider installing multiple night lights in different parts of your house.
14. Periodically check the automatic function of the dusk-to-dawn sensor to ensure it is working correctly.
15. Now, you can relax and enjoy the comfort and ease provided by your new Elsent LED Night Light.
Please refer to the user manual for any additional information or specific instructions related to the Elsent lsent Plug-in LED Night Light.
Add New Comment