User Manual Q&AAnswer
Jul 29, 2024 - 03:30 AM
To change the flame effect mode on the CFGROW CF-64 LED Flame Effect Light, follow these steps:
1. Make sure the light is turned on by pressing the ON/OFF button located at the base of the light.
2. Use the remote control that comes with the light to change the flame effect mode. The remote control has buttons labeled "Flame," "Light," and "Breath" for different modes.
- Flame Dancing Mode: Press the "Flame" button to initiate a mode where the light simulates the movement of a real flame. This mode creates a dynamic and flickering flame effect.
- Constant Lighting Mode: Press the "Light" button to activate a steady light mode without flickering. This mode provides a warm and steady light without the flame effect.
- Breath Mode: Press the "Breath" button to initiate a mode where the light intensity varies, mimicking a breathing pattern. This mode creates a subtle and calming effect.
3. Experiment with the different modes to find the desired ambiance for your space. You can switch between modes by pressing the corresponding buttons on the remote control.
Note: If the flame effect mode does not change when pressing the buttons on the remote control, make sure the remote control is within the range of the light and that the battery is inserted correctly and has sufficient charge.
For more information and troubleshooting tips, refer to the user manual provided with the CFGROW CF-64 LED Flame Effect Light.
Add New Comment