User Manual Q&AAnswer
Jul 25, 2024 - 03:34 AM
Replacing the roller heads on the Geopu ZCA019 Electric Foot Callus Remover is a simple process. Here are the step-by-step instructions:
1. Ensure the device is turned off and unplugged from the power source.
2. Hold the device firmly with one hand and locate the release button on the side of the roller head.
3. Press the release button and simultaneously pull the roller head away from the device to detach it.
4. Take one of the replacement roller heads from the kit and align the plastic tabs on the roller head with the slots on the device.
5. Push the roller head firmly into place until you hear a click, indicating that it is securely attached.
6. Give the roller head a gentle tug to ensure it is properly locked in place.
7. You can now turn on the device and use it with the new roller head for your foot care needs.
Remember to clean the roller head after each use to maintain optimal performance and longevity. Simply detach the roller head and clean it using the included brush, then rinse it under running water to remove any dead skin or debris. Ensure it is completely dry before reattaching it to the device.
If you have any further questions or need assistance, please refer to the user manual or contact the manufacturer's customer support for additional guidance.
Add New Comment