User Manual Q&AAnswer
Jul 24, 2024 - 04:43 AM
To change the lighting and flame effect settings on the TOPCHANCES 43237-2 3D Fake Flame Lamp, you have two options: using the remote control or the touch control function.
Using the remote control:
1. Make sure the lamp is plugged in and turned on.
2. Point the remote control towards the lamp.
3. Press the power button on the remote control to turn on the lamp.
4. Use the arrow buttons on the remote control to navigate through the different lighting and flame effect settings.
5. Press the OK or select button on the remote control to confirm your selection.
Using the touch control function:
1. Make sure the lamp is plugged in and turned on.
2. Locate the touch control area on the lamp. It is usually located on the base or the side of the lamp.
3. Tap or touch the touch control area to cycle through the different lighting and flame effect settings.
4. Keep tapping or touching the touch control area until you find the desired setting.
Please refer to the user manual for more detailed instructions and illustrations on how to change the lighting and flame effect settings on the TOPCHANCES 43237-2 3D Fake Flame Lamp.
Add New Comment