User Manual Q&AAnswer
Jul 24, 2024 - 03:38 AM
Sure! Here are the step-by-step instructions for installing the Keonjinn K1MIFZ003A 36 x 24 Inch Dimmable Mirror:
1. Pre-assembly: After opening the package, inspect the product immediately for any transit damage or missing parts.
2. Measure and confirm the mounting method: The mirror can be mounted either horizontally or vertically. Measure the mounting points accordingly.
3. Mounting point measurement: Measure the distance of the four hooks' center and use a level ruler to draw a horizontal line on the wall. Mark the location of the center of the hooks.
4. Drill pilot holes: Use an electric drill to punch four 6mm holes at the marked spots on the wall. Then, apply wall anchors with a hammer. The drilling depth should be around 5 cm.
5. Insert the screws: Use a screwdriver to xxxx the screws into the wall anchors, leaving a distance of 7 mm from the wall.
6. Connect the power: There are three power wires behind the mirror - the live wire (black), the neutral wire (white), and the ground wire (green). You can connect the wires to a standard switched lighting circuit or a plug. If connecting to a plug, follow the provided steps in the manual.
7. Mount the mirror on the wall: Once the power is connected, mount the mirror on the wall using the hooks and screws. Ensure that it is sturdy and securely attached.
8. Remove the silicone corner protector: After the installation is completed, remove the silicone corner protector from the mirror.
Please note that these instructions are a summary, and it's important to refer to the complete user manual for detailed information and safety precautions.
Add New Comment