User Manual Q&AAnswer
Jul 24, 2024 - 01:26 AM
To bind the FLYSKY FS-iA6B Receiver with your transmitter, you can follow the steps provided in the user manual. There are two binding modes: two-way binding and one-way binding.
For two-way binding:
1. Set the RF standard of your transmitter to "2 WAY".
2. Put the transmitter into bind mode.
3. There are two ways to enter bind mode on the receiver:
a. BIND button binding: Press and hold the BIND button on the receiver while powering it on. The LED on the receiver should start flashing, indicating it is in bind mode. Release the BIND button.
b. BIND button binding after power-on: If the receiver has not been connected to the transmitter when powered on, press and hold the BIND button for 3 seconds. The LED on the receiver should start flashing, indicating it is in bind mode. Release the BIND button.
4. Once the LED on the receiver becomes solid, the binding process should be completed. The transmitter will automatically exit the bind mode.
5. Check to ensure that the transmitter and receiver functions are working correctly. If any issues arise, repeat steps 1 to 3 (binding process).
For one-way binding:
1. Set the RF standard of your transmitter to "1 WAY".
2. Put the transmitter into bind mode.
3. Put the receiver into bind mode (follow the steps mentioned above for entering bind mode).
4. When the LED on the receiver is in a slow flashing state, the binding process should be completed. Manually exit the bind mode on the transmitter. The LED on the receiver should become solid, indicating that the binding is completed.
5. Check to ensure that the transmitter and receiver functions are working correctly. If any issues arise, repeat steps 1 to 3 (binding process).
Please refer to the user manual for more detailed instructions and illustrations.
Add New Comment