User Manual Q&AAnswer
Jul 23, 2024 - 01:32 AM
Sure! Here is a step-by-step guide on how to install the ZOKON Kit-01 Led Vanity Mirror Lights:
1. Take the ZOKON Kit-01 LED makeup mirror lights out of the box and inspect them for any damage or flaws.
2. Determine where you want to place the LED light strip on the surface of your vanity mirror.
3. Clean the mirror surface thoroughly to ensure good adhesion of the sticky backing.
4. Carefully peel off the protective film from the adhesive backing and stick the LED light strip to the mirror in your desired design or arrangement.
5. Use the connectors provided to connect the dimmer device to the LED light strip.
6. Plug the 12V power supply into a wall outlet and connect it to the dimmer switch.
7. Test the dimmer device to ensure that the LED lights can be turned on and off and that the brightness can be adjusted as needed.
8. If desired, use the remote control to make further changes to the settings and lighting from a distance.
9. Make any necessary adjustments to the placement and arrangement of the LED light strip to achieve the desired look.
10. Secure any extra lines or cables to keep the installation neat.
11. Ensure that all connections are tight and properly insulated to prevent electrical hazards.
12. Double-check that the LED vanity mirror lights are functioning properly and providing sufficient light.
13. Make any additional adjustments to the lighting settings to achieve the desired mood or ambiance.
14. Enjoy the improved lighting for makeup application, grooming, or general use.
Please refer to the ZOKON Kit-01 Led Vanity Mirror Lights Instruction Manual for more detailed information and safety precautions.
Add New Comment