User Manual Q&AAnswer
Jul 22, 2024 - 11:16 PM
Cleaning the NUTRIBULLET NBJ50300 Slow Masticating Juicer Machine is quick and easy. Here are the instructions for cleaning the different parts:
1. Make sure the juicer is powered OFF, cooled down completely, and unplugged before starting disassembly. Ensure that the motor has completely stopped, the grinding assembly has stopped moving, and all moving parts have stopped before disassembling the juicer.
2. Remove the Juice Container from under the juice spout. To prevent drips, use the spout cover to close the juice spout.
3. Remove the Pulp Container from under the pulp spout.
4. Twist the Juice Bowl lid counterclockwise to unlock it, then lift to remove it from the top of the juicing jar.
5. Remove the Auger from the bowl.
6. Detach and lift the Juice Bowl (with the Rotating Bowl Brush, Juicing Screen, and Auger still inside) off the top of the base.
7. Remove the Rotating Bowl Brush and Juicing Screen together from the bowl.
8. Detach the Rotating Bowl Brush from the Juicing Screen by moving it downwards.
9. If the Food Pusher is inside the feed chute, remove it.
10. Clean all juicer parts, except for the Motor Base, in warm, soapy water. Or, you can put all parts into the dishwasher except for the Auger.
11. CAUTION: ALWAYS clean the Auger by hand with warm, soapy water and a soft cloth. The Auger is not dishwasher safe.
12. The Cleaning Brush can be used for better cleaning of the Juicing Screen. The screen can be cleaned completely using the small Cleaning Brush. Use this brush to scrub the Screen under running water. Be sure to properly clean the screen every time you juice. Leftover traces of fruits and vegetables can cause residue buildup in the strainer, which can clog the holes and may prohibit maximum juice extraction.
13. CAUTION: The Juice Screen is sharp, so handle carefully during cleaning.
14. If you need to clean the pulp spout, first pull the pulp plug out of the pulp spout, then clean it thoroughly with the narrow end of the Cleaning Brush. The narrow end of the Cleaning Brush is sized so that it can fit inside the pulp spout to help remove pulp that has been stuck. Run water through the bowl and pulp spout to help remove any remaining pulp.
15. Wipe the outside of the base with a clean, damp cloth. WARNING: Never submerge the Motor Base into water or other liquid.
16. Let all parts dry thoroughly, then assemble and store the appliance in a dry place. The Juice Container can be stored in the Pulp Container.
PRO TIP: Clean your appliance as soon as possible after juicing. If allowed to sit, pulp may dry on one or more parts (such as the Juicing Screen), which can make it more difficult to scrub away residue. If any pulp residue does cake onto any parts of the unit, allow those parts to soak in hot water for 30 minutes, which should soften the residue and make it easier to remove.
Please refer to the NUTRIBULLET NBJ50300 Slow Masticating Juicer Machine User Guide for more detailed instructions and illustrations on cleaning the juicer.
Add New Comment