User Manual Q&AAnswer
Jul 22, 2024 - 03:01 AM
If your Hi-Spec DT9707PR USB Electric Screwdriver doesn't turn on, there are a few things you can check:
1. Ensure the battery is charged: Make sure that the battery is fully charged. Connect the screwdriver to a phone charger or computer USB powered socket using the supplied USB cable. The LED light on the screwdriver will indicate the battery level during charging. If the battery is not charged, leave it connected for a sufficient amount of time to fully charge.
2. Check the power switch: Ensure that the power switch on the screwdriver is in the "on" position. Sometimes, the switch may accidentally be in the "off" position, preventing the screwdriver from turning on.
3. Check for loose connections: Inspect the connections between the battery and the screwdriver. Make sure that they are securely connected. Loose connections can prevent the screwdriver from receiving power.
4. Check for debris or obstructions: Examine the switch mechanism and the area around it for any debris or obstructions. Dust, dirt, or other particles can interfere with the proper functioning of the switch. Clean the area if necessary.
If you have checked all of the above and the screwdriver still doesn't turn on, it may be a defect or malfunction. In such cases, it is recommended to contact Hi-Spec customer support for further assistance. They will be able to provide you with troubleshooting guidance or arrange for a repair or replacement if necessary.
Add New Comment