User Manual Q&AAnswer
Jul 22, 2024 - 02:58 AM
Changing the drill bit in the WORKPRO W004576A Cordless Drill Driver Set is a simple process. Here are the step-by-step instructions:
1. Ensure that the drill is turned off and the battery is removed for safety.
2. Locate the chuck at the front of the drill. The chuck is the part that holds the drill bit.
3. To loosen the chuck, hold the drill with one hand and rotate the chuck counterclockwise with your other hand. This will open the jaws of the chuck.
4. Insert the desired drill bit into the jaws of the chuck. Make sure the bit is aligned with the center of the chuck.
5. Once the bit is inserted, hold the drill with one hand and rotate the chuck clockwise with your other hand. This will tighten the chuck and secure the drill bit in place.
6. Give the chuck a final twist to ensure it is securely tightened.
7. Reinsert the battery into the drill and you are ready to use the new drill bit.
Please refer to the user manual provided for visual illustrations and additional information on using the WORKPRO W004576A Cordless Drill Driver Set.
Add New Comment