User Manual Q&AAnswer
Jul 22, 2024 - 02:52 AM
To change the drill bit on the GardenJoy FH-6912S Cordless Power Drill, please follow these steps:
1. Make sure the drill is turned off and the battery pack is removed for safety.
2. Locate the chuck at the front of the drill. The chuck is the part that holds the drill bit.
3. Rotate the front part of the chuck counterclockwise to open the chuck jaws.
4. Insert the desired drill bit into the chuck, making sure it is centered and fully inserted.
5. Rotate the front part of the chuck clockwise to tighten the chuck jaws around the drill bit. Make sure it is securely tightened.
6. To check if the drill bit is properly secured, try gently pulling on it. It should not come out.
7. Once the drill bit is securely in place, you can reinsert the battery pack and turn on the drill to start using it.
Please refer to the GardenJoy FH-6912S Cordless Power Drill Instruction Manual for more detailed instructions and safety precautions.
Add New Comment