User Manual Q&AAnswer
Jul 22, 2024 - 01:06 AM
Assembling the ELIKIDSTO JM1 Juicer Machine is a straightforward process. Follow these steps to ensure proper assembly:
1. Take the juicer out of the box and remove any packaging materials or protective films.
2. Place the juicer on a flat and stable surface in your kitchen.
3. Connect the juicer to a power source, ensuring that the power cord is securely plugged in.
4. Before plugging in the juicer, set the speed gear to "0" to prevent any accidental operation.
5. Locate the stainless steel safety arm lock, which is used to secure the juicer during operation. Clip it onto the juicer in the designated slot, ensuring it is properly attached.
6. If any parts of the juicer can be taken apart for cleaning or maintenance, assemble them according to the instruction manual. This may include the juice container, pulp container, and filter.
7. To choose the desired speed mode (low or high), turn the speed xxxx to the corresponding setting.
8. Before using the juicer, make sure to wash the fruits and vegetables thoroughly and, if necessary, cut them into smaller pieces that can fit through the wide feed chute.
9. Place the prepared fruits or vegetables into the juicer's wide tube, ensuring they are properly aligned with the blades.
10. Once everything is in place, turn on the juicer and begin the juicing process.
11. Monitor the juicer during operation to ensure it is working properly and extracting juice efficiently.
12. When you are finished using the juicer, turn it off and unplug it from the power source.
13. Disassemble the juicer for cleaning, following the instructions provided in the care and maintenance section of the manual.
By following these steps, you should be able to assemble your ELIKIDSTO JM1 Juicer Machine correctly and start enjoying fresh juices in no time. For further guidance, refer to the instruction manual included with the product.
Add New Comment