User Manual Q&AAnswer
Jul 22, 2024 - 12:54 AM
To install the TETOTE 16x24 Inch Black Frame Mirror, you will need the following tools: level, pencil, hammer, safety goggles, electric drill, Phillips screwdriver, and tape measure.
1. Mounting point measurement: Measure the distance of the four hooks' center and use the level ruler to draw a horizontal line on the wall. Mark the location of the center of the hooks.
2. Holes #1 and #2 are used when installing the mirror horizontally. Holes #3 and #4 are used when installing the mirror vertically. It is recommended to use only two hooks.
3. Drill pilot holes on the marked spots: Use an electric drill to punch two 6mm holes at the marked spots. Then, apply wall anchors with a hammer. The drilling depth should be around 5 cm.
4. Insert the xxxx : Use a screwdriver to loosen the xxxx on the wall anchors, setting aside a 7mm distance to the wall.
5. Mount the mirror on the wall and ensure it is sturdy.
For further assistance or if you have any problems during the installation process, please feel free to contact us at sales@tetote-tech.com.
Note: The provided information is a summary of the installation process. For more detailed instructions and illustrations, please refer to the TETOTE 16x24 Inch Black Frame Mirror User Manual.
Add New Comment