User Manual Q&AAnswer
Jul 22, 2024 - 12:46 AM
To change the drill bits on the WORKPRO W004572A Cordless Drill, follow these steps:
1. Make sure the drill is turned off and the battery is removed for safety.
2. Hold the drill with one hand and locate the chuck, which is the part at the front of the drill that holds the drill bit.
3. Rotate the chuck counterclockwise to loosen it. You may need to apply some force, but be careful not to overtighten or overtighten the chuck.
4. Once the chuck is loosened, you can remove the current drill bit by pulling it straight out.
5. Insert the new drill bit into the chuck, making sure it is aligned properly.
6. Tighten the chuck by rotating it clockwise until it is securely holding the drill bit. Again, be careful not to overtighten.
7. Give the chuck a gentle tug to ensure the drill bit is securely held in place.
If you are still having difficulty changing the drill bits, refer to the WORKPRO W004572A Cordless Drill Combo Kit Instruction Manual for more detailed instructions and illustrations.
Add New Comment