User Manual Q&AAnswer
Jul 22, 2024 - 12:41 AM
To insert and change bits on the INSPIRITECH BPD9220 Power Drill Set, follow these steps:
1. Inserting a bit:
a. Hold the chuck and rotate it counterclockwise to open the jaws.
b. Insert the desired bit into the chuck, making sure it is aligned with the jaws.
c. Tighten the chuck by rotating it clockwise until the bit is securely held in place.
2. Changing a bit:
a. To remove a bit, hold the chuck and rotate it counterclockwise to open the jaws.
b. Remove the current bit from the chuck.
c. Insert the new bit into the chuck, aligning it with the jaws.
d. Tighten the chuck by rotating it clockwise until the new bit is securely held in place.
Note: Make sure to use the appropriate size and type of bit for your specific task. The INSPIRITECH BPD9220 Power Drill Set is compatible with bit heads ranging in diameter from 1/32 inch to 3/8 inch.
For more detailed instructions and illustrations, please refer to the "Usage Instructions" section of the INSPIRITECH BPD9220 Power Drill Set User Manual.
Add New Comment