User Manual Q&AAnswer
Jul 22, 2024 - 12:33 AM
To change the lighting modes on the HAUSBELL A100 LED Flashlight, follow these steps:
1. Make sure the flashlight is turned on by pressing the on/off button.
2. Once the flashlight is on, press the mode selection button to cycle through the different lighting modes.
3. Each press of the mode selection button will switch to the next mode in the following order: high, medium, low, strobe, and emergency.
4. Keep pressing the mode selection button until you reach the desired lighting mode.
5. The flashlight will remember the last mode used, so you don't need to cycle through all the modes every time you turn it on.
Note: The mode selection button is separate from the on/off button and is usually located near the head or body of the flashlight. Refer to the user manual or the product itself for the exact location of the mode selection button.
For more detailed instructions and illustrations, please refer to the user manual provided with the HAUSBELL A100 LED Flashlight.
Add New Comment