User Manual Q&AAnswer
Jul 20, 2024 - 02:00 AM
Adjusting the length of the light beam on the Daylight24 402071-39 LED Floor Lamp is easy with the pull shade feature. Here are the step-by-step instructions:
1. Locate the pull shade on the lamp. It is usually located near the top of the lampshade or on the side.
2. Hold the pull shade firmly with one hand.
3. Gently pull the shade downwards to extend the light beam. The further you pull, the longer the beam will be.
4. To shorten the light beam, push the shade upwards towards the lamp. The beam will become shorter as you push the shade up.
5. Adjust the length of the light beam to your desired preference by pulling or pushing the shade accordingly.
6. Once you have set the desired length, release the pull shade. It should stay in place and maintain the chosen beam length.
Note: The pull shade allows you to change the length of the light beam from 3 inches to 33 inches at a distance of 12 inches. Experiment with different lengths to find the optimal lighting for your needs.
If you have any further questions or need additional assistance, please refer to the instruction manual provided with the Daylight24 402071-39 LED Floor Lamp or contact customer service for further support.
Add New Comment