User Manual Q&AAnswer
Jul 20, 2024 - 01:49 AM
To assemble the Henn&Hart FL0266 Arc Floor Lamp, follow these steps:
1. Carefully remove all parts and hardware from the packaging, making sure not to discard any contents until after assembly is complete.
2. Pull the power cord out from the Base (F) to remove any slack.
3. Start by attaching the Top Post (A) to the Glass Shade (B). Carefully xxxx the Glass Shade onto the Top Post and tighten it fully by hand.
4. xxxx the Middle Post (C) onto the Top Post, and tighten it fully.
5. xxxx the Bottom Post (D) onto the Middle Post, and tighten it fully.
6. Attach the Bottom Post Support (E) to the Bottom Post, and tighten it fully.
7. Insert the Bottom Post Support through the Base (F), and secure it using the Locking Washer (G), Washer (H), and Nut (J). Tighten it fully with the provided Wrench (K).
8. xxxx the specified light bulb into the socket and straighten the socket by hand if needed. Remember to never touch a hot light bulb.
9. After assembly is completed, you can loosen and retighten the Nut (J) to straighten the lamp if necessary.
Please refer to the Henn&Hart FL0266 Arc Floor Lamp Instruction Manual for visual illustrations and additional information on assembly.
Add New Comment