User Manual Q&AAnswer
Jul 19, 2024 - 11:06 PM
Changing the accessories on your AVID POWER CRT324 Cordless Rotary Tool is a simple process. Here are the step-by-step instructions:
1. Ensure that the rotary tool is turned off and unplugged from the power source.
2. Locate the collet at the end of the tool. The collet is the part that holds the accessories in place.
3. Depending on the size of the accessory you want to use, choose the appropriate collet size. The AVID POWER CRT324 Cordless Rotary Tool comes with collet sizes of 3/32" and 1/8".
4. Insert the accessory into the collet. Make sure it is fully inserted and seated securely.
5. To tighten the collet, hold the tool with one hand and use the collet nut wrench (included in the accessories kit) to turn the collet nut clockwise. This will secure the accessory in place.
6. To remove an accessory, follow the same steps in reverse. Ensure that the tool is turned off and unplugged, then use the collet nut wrench to loosen the collet nut counterclockwise. Once the nut is loose, you can remove the accessory from the collet.
It's important to note that when changing accessories, always ensure that the tool is turned off and unplugged for safety. Additionally, make sure to use the appropriate collet size for the accessory you are using to ensure a secure fit.
For more detailed instructions and illustrations, please refer to the Instruction Manual included with your AVID POWER CRT324 Cordless Rotary Tool.
Add New Comment