User Manual Q&AAnswer
Jul 19, 2024 - 10:53 PM
If your FASTPRO F00717 Cordless Drill Driver is not turning on, there are a few possible reasons for this issue. Here are some troubleshooting steps you can try:
1. Check the battery: Ensure that the battery is properly inserted into the drill driver and securely connected. If the battery is loose or not making proper contact, the drill driver may not turn on. Try removing the battery and reinserting it to ensure a secure connection.
2. Charge the battery: Even if you have charged the battery, it's possible that it did not charge fully or has lost its charge. Try recharging the battery using the included charger. Make sure the charger is properly connected to a power outlet and that the charging indicator lights up. Once the battery is fully charged, insert it into the drill driver and try turning it on again.
3. Check the trigger: Ensure that you are fully pressing the variable speed trigger. The drill driver may not turn on if the trigger is not fully engaged. Press the trigger firmly and check if the drill driver powers on.
4. Check for obstructions: Inspect the chuck and motor area for any obstructions that may be preventing the drill driver from turning on. Remove any debris or objects that may be blocking the movement of the chuck or motor.
If none of these steps resolve the issue, it is recommended to refer to the user manual or contact FASTPRO customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a repair or replacement if necessary.
Add New Comment