User Manual Q&AAnswer
Jul 13, 2024 - 01:26 AM
To charge the LcFun HY-6008 Rechargeable Electronic Windproof Lighter, follow these steps:
1. Locate the USB charging cable included in the package.
2. Connect one end of the USB cable to the charging port on the bottom of the lighter.
3. Plug the other end of the USB cable into a suitable power source, such as a computer, wall adapter, or power bank.
4. The LED indicator on the lighter will turn red to indicate that it is charging.
5. Allow the lighter to charge for approximately 1-2 hours or until the LED indicator turns green, indicating a full charge.
6. Once fully charged, disconnect the USB cable from the lighter.
It's important to note that using a charger with a larger output than the recommended specifications (DC 5.0±0.25V, 4A) may overload the circuit board and cause damage. Additionally, it is advised to avoid charging the lighter for an extended period to prevent overcharging.
For more detailed information, refer to the user manual provided with the LcFun HY-6008 Rechargeable Electronic Windproof Lighter.
Add New Comment