User Manual Q&AAnswer
Jul 09, 2024 - 03:41 AM
Cleaning the lint collector of the VASSON HHLR01 Electric Lint Remover is a simple process. Here are the steps to follow:
1. Ensure the device is turned off and unplugged from the power source before cleaning.
2. Locate the lint collector, which is the compartment that collects the removed lint and fuzz. It is usually located at the bottom or back of the device.
3. Press the release button or latch to open the lint collector compartment.
4. Carefully remove the lint collector from the device.
5. Empty the collected lint and fuzz into a trash bin. You can use your fingers or a small brush to remove any stubborn lint.
6. Once the lint collector is empty, rinse it with water to remove any remaining lint or debris. You can also use a mild detergent if necessary.
7. Thoroughly dry the lint collector before reattaching it to the device. Make sure it is completely dry to prevent any moisture-related issues.
8. Align the lint collector properly with the device and securely attach it by pressing or latching it back into place.
9. After cleaning the lint collector, you can also use the provided cleaning brush to remove any accumulated lint or debris from the device's blades or other parts.
It is recommended to clean the lint collector regularly to maintain optimal performance and prevent any blockages that may affect the device's efficiency.
Add New Comment