User Manual Q&AAnswer
Jul 09, 2024 - 01:48 AM
To switch between Bluetooth receiving and transmitting modes on the UGREEN CM403 Bluetooth Audio Receiver/Transmitter, follow these steps:
1. Power on the device by pressing and holding the multifunction button for 3 seconds until the indicator lights up blue for 1 second.
2. To enter Bluetooth receiving mode, slide the power button to the "RX" position.
3. Insert the product into the AUX port of the Bluetooth receiver (like a speaker) and press and hold the multifunction button for 3 seconds to power on and ready for pairing.
4. Enable Bluetooth access on your phone and search for "UGREEN-80893" to connect. The voice prompt of "Bluetooth connected" indicates the connection is established.
5. To switch to Bluetooth transmitting mode, slide the power button to the "TX" position.
6. Insert the product into the AUX port of the Bluetooth transmitter (like a computer) and press and hold the multifunction button for 3 seconds to power on and ready for pairing.
7. Turn on your receiving devices (Bluetooth earphones/speakers) to enter pairing mode.
8. The product will automatically pair with and connect to your device.
By following these steps, you can easily switch between Bluetooth receiving and transmitting modes on the UGREEN CM403 Bluetooth Audio Receiver/Transmitter.
Add New Comment