User Manual Q&AAnswer
Jul 05, 2024 - 05:40 AM
To switch between the different modes on the ROCKBIRDS X6 LED Flashlight, follow these steps:
1. Turn on the flashlight by pressing the ON/OFF switch located on the body of the flashlight.
2. Once the flashlight is turned on, quickly press the switch again to cycle through the different modes.
3. Each press of the switch will change the mode in the following order: Low, Medium, High, SOS, and Strobe.
4. Keep pressing the switch until you reach the desired mode.
5. To turn off the flashlight, press and hold the ON/OFF switch for a few seconds until the light turns off.
Note: The specific method of switching between modes may vary slightly depending on the model or version of the ROCKBIRDS X6 LED Flashlight. Please refer to the user manual provided with your flashlight for any additional instructions or variations.
Add New Comment