User Manual Q&AAnswer
Jul 05, 2024 - 03:17 AM
To assemble the AMZCHEF ZM1517 Slow Juicer Machine, follow these steps:
1. Align the sign " " on the juicing body with the " " on the main body, then put the juicing body into the main body. You will hear a "Tick" sound to confirm it is fastened tightly and correctly.
2. Insert the Auger into the main juicing body and push it horizontally until it reaches the bottom. If alignment fails, turn the Auger slightly.
3. Fit the larger-hole end of the juicer strainer into the tail of the Auger and push it while aligning the three clips of the juicer strainer with the three clamping slots in the drum. The juice strainer is used with the juicing button in the rear only.
4. Insert the end cap and rotate it counterclockwise until aligning " " on the end cap with " " on the juicing body.
5. Put the juice container in the corresponding groove on the main body and align its opening with the bottom of the juice outlet of the drum.
6. Put the pulp container below the pulp outlet of the drum.
7. Connect the power supply for use of the appliance.
8. Operate the appliance according to the method of operation provided in the manual.
9. Put food ingredients into the feeding chute and push them down with the food pusher.
For a visual demonstration, refer to the video provided in the manual.
Note: It is important to thoroughly clean any parts in contact with food material before first use.
Add New Comment