User Manual Q&AAnswer
Jul 05, 2024 - 03:16 AM
To assemble the Omega CNC80 Cold Press Juicer Machine, please follow these steps:
1. Start by placing the housing (part A) on a flat and stable surface.
2. Attach the locking clip (part B) to the housing by aligning the tabs and pressing it firmly until it clicks into place.
3. Insert the chute/drum (part C) into the housing, ensuring that it is securely attached.
4. Place the hopper (part D) on top of the chute/drum, aligning the tabs and pressing it down until it locks into place.
5. Insert the auger (part F) into the chute/drum, making sure it is properly aligned and seated.
6. Attach the juicing screen (part I) onto the auger, ensuring that it fits snugly.
7. Adjust the end cap (part E) by turning it counter clockwise to tighten or clockwise to loosen the squeeze pressure. The tighter setting is recommended for wheatgrass, while the loosest setting is suitable for citrus juice.
8. Attach the adjustable pressure cap (part P) onto the end cap, aligning the tabs and pressing it down until it locks into place.
9. Place the pulp container (part L) and juice container (part K) under the respective outlets.
10. Your Omega CNC80 Cold Press Juicer Machine is now assembled and ready to use.
Please refer to the user manual for more detailed instructions and safety precautions.
Add New Comment