User Manual Q&AAnswer
Jul 05, 2024 - 02:55 AM
Here is a step-by-step guide on how to assemble and use the Hamilton Beach 67850 Juicer Machine:
1. Wash all parts except the base in warm, soapy water before first use. Rinse and dry immediately. Do not immerse the base in water.
2. Place the strainer bowl on top of the motor base.
3. Insert the stainless steel strainer basket inside the strainer bowl. Press it down firmly to latch into position.
4. Place the lid over the strainer bowl and position the feed chute over the strainer basket. Lower it into position.
5. Raise the locking arm up and over the indentation in the lid until it clicks into place.
6. To minimize cleanup, place a plastic grocery bag in the pulp container to collect pulp.
7. Push the removable drip-free spout down into place for juicing.
8. Place the pitcher with the lid under the juice spout.
9. Rotate the control xxxx to the OFF position. Plug the juicer into an outlet. The ring around the control xxxx will illuminate blue if properly assembled.
10. Rotate the control xxxx to the LOW or HIGH setting, depending on your preference.
11. With the motor running, place food in the feed chute. Use the food pusher to push the food down. Wash fruits and vegetables before juicing.
12. The juice will flow into the pitcher, and the separated pulp will accumulate in the pulp container.
13. After juicing, turn the control xxxx to the OFF position. Unplug the juicer before disassembling.
14. To disassemble, turn the juicer off and unplug it. Lift off the lid and remove the pulp container. Lift off the strainer bowl with the strainer basket still in place. Carefully remove the strainer basket by turning the strainer bowl upside down.
15. Clean all parts with warm, soapy water. Use the Easy Sweep cleaning tool to clean the strainer basket. Do not use the "SANI" setting when washing in the dishwasher.
Remember to refer to the instruction manual for more detailed information and safety precautions.
Add New Comment