User Manual Q&AAnswer
Jul 04, 2024 - 12:37 AM
To clean the Ball freshTECH FTJM-AU-15-01 Automatic Jam & Jelly Maker after use, you can follow these steps:
1. Glass Lid, Stirrer, and Pot: These parts can be washed in warm soapy water. Simply remove them from the appliance and wash them using a cloth or sponge. Rinse them thoroughly and dry them before storing.
2. Appliance Base: The base can be wiped down with a slightly damp cloth. Make sure the appliance is unplugged from the power source before cleaning. Do not immerse the base in water or any other liquids.
3. Connector and Appliance Inlet: The connector and appliance inlet must be dried before using the appliance again. Make sure they are completely dry before plugging in the power cord.
4. Do not use abrasive cleaning compounds or scouring pads to clean any part of the jam and jelly maker. These can damage the surfaces.
5. The Glass Lid should not be washed in cold water when it is hot, as sudden temperature changes can cause damage. Let the lid cool completely before washing it.
It is recommended to hand wash the parts of the jam and jelly maker, but they can also be washed in the dishwasher if desired. However, make sure to check the manufacturer's instructions for any specific cleaning recommendations.
Please refer to the Ball freshTECH FTJM-AU-15-01 Automatic Jam & Jelly Maker User Manual for more detailed instructions on cleaning and care.
Add New Comment