User Manual Q&AAnswer
Jul 04, 2024 - 12:04 AM
To change the bulb in your Ryobi P704 cordless flashlight, please follow these steps:
1. Before starting, make sure the battery pack is removed from the flashlight.
2. Locate the bulb on the front of the flashlight.
3. Carefully remove the old bulb by gently pulling it straight out from the socket.
4. Take the new bulb (make sure it is the same type rated 18V, 0.6 Amp) and insert it into the socket, pushing it in until it is securely in place.
5. Once the new bulb is inserted, you can reattach the battery pack to the flashlight.
It is important to note that the bulb replacement should only be done with the battery pack removed to prevent any accidental activation of the flashlight. Always use caution when handling the bulb to avoid any damage or injury.
For more detailed instructions and illustrations, please refer to page 6 of the Ryobi P704 Cordless Flashlight Operating's Manual.
Add New Comment