User Manual Q&AAnswer
Jul 03, 2024 - 05:23 AM
To turn on the Aleshon FPO-0218 Pulse Oximeter Fingertip, please follow these steps:
1. Take the pulse oximeter out of its box and inspect it for any visible damage.
2. Ensure that the polarity is correct when inserting two AAA batteries into the battery box.
3. Press the power button to turn on the device.
4. Make sure your finger is fully and correctly placed into the device before inserting it.
5. Wait for the TFT screen to display your SpO2 values, heart rate, and other important information.
6. You can switch between different display modes and adjust the lighting levels by pressing the button.
7. To conserve battery life, wait for 5 seconds after viewing the readings before removing your finger from the sensor.
Please refer to the user manual for more detailed instructions and information on using the Aleshon FPO-0218 Pulse Oximeter Fingertip.
Add New Comment