User Manual Q&AAnswer
Jul 02, 2024 - 12:39 AM
To assemble the Lansinoh Signature Pro Double Electric Breast Pump, follow these steps:
1. Before first use, sterilize all parts that will come into contact with milk according to the instructions on page 8, section 3.1.
2. Start by assembling the Breastmilk Expression Set. Place the purple silicone diaphragm, feet down, on the top of the breast flange body. Make sure the diaphragm fits securely between the rims of the breast flange body. Then, place the clear diaphragm cap over the breast flange body and twist to secure it, ensuring that the tubing portal is facing the back of the pump. Next, firmly push the ComfortFit Breast Flange into the breast flange body. Finally, hold the base of the white valve and gently secure it into the bottom of the breast flange body.
3. xxxx the collection bottle onto the breast flange body.
4. Attach one end of the 300 mm tubing to the back of the diaphragm cap, making sure it is pushed all the way to the base of the attachment port and completely covers it. Attach the other end of the 300 mm tubing to the Tubing Y Connector.
5. Repeat the assembly process for the second breast flange body.
6. Once the Breastmilk Expression Set is assembled, connect it to the pump base. Secure one end of the 600 mm tubing to the Tubing Y Connector and the other end to the pump connector. Insert the pump connector into the opening on the left side of the pump.
7. If you are single pumping, remove one of the 300 mm tubing from the Tubing Y Connector and secure the plug into the open outlet of the Tubing Y Connector.
Please refer to the diagrams on page 16 of the user manual for a visual representation of the parts and their assembly.
If you have any further questions or need additional assistance, please contact Lansinoh's dedicated Customer Service team at 800-292-4794 or email customerservice@lansinoh.com.
Add New Comment