User Manual Q&AAnswer
Jul 02, 2024 - 12:38 AM
To assemble the Breville BJE510XL Fountain Multi-Speed Juicer, follow these steps:
1. Place the motor base on a flat, dry surface.
2. Place the filter bowl surround on top of the motor base.
3. Align the arrows at the base of the Nutri Disc with the arrows on the motor drive coupling and push down until it clicks into place.
4. Place the juicer cover over the filter bowl surround, positioning the feed chute over the Nutri Disc and lower into position.
5. Raise the safety-locking arm up and locate it into the two grooves on either side of the juicer cover. The safety locking arm should now be in a vertical position and locked into place on top of the juicer cover.
6. Slide the food pusher down the feed chute by aligning the groove of the food pusher with the small protrusion on the inside top of the feed chute. Continue to slide the food pusher down into the feed chute.
7. Place the pulp container into position by tilting the base of the pulp container away from the motor base and sliding the top of the pulp container over the bottom of the juice cover. Tilt the base of the pulp container back into the motor base ensuring it is supported by the container support extending from under the motor base.
8. Place the juice jug provided under the spout on the right-hand side of the juicer. The juice jug lid can be used to avoid any splatter. Alternatively, you can fit the custom-designed juice nozzle over the juice spout and place a glass underneath. The juice nozzle will prevent splatter, ensuring mess-free juicing.
Please refer to the instruction manual for more detailed information and illustrations on the assembly process.
Add New Comment