User Manual Q&AAnswer
Jul 01, 2024 - 11:22 PM
Cleaning the BOLOLO BL1001 Baby Bottle Sterilizer is essential to keep it running at its best and prevent any buildup or residue. Here are the steps to clean the sterilizer:
1. After each use, unplug the sterilizer from the wall and let it cool down fully.
2. Use a wet cloth to wipe down the inside and outside of the sterilizer, removing any visible residue or buildup.
3. If there are tough spots or residues, mix a mild detergent solution with water and use it to clean the sterilizer. Make sure to rinse the sterilizer well after using the detergent solution.
4. Before putting the sterilizer away, dry it with a clean, soft cloth or let it air dry.
5. When not in use, store the sterilizer in a clean and dry place, away from direct sunlight and water.
Important Tips:
- Do not use rough cleaners, scouring pads, or strong chemicals on the sterilizer, as they could damage the surfaces.
- Do not submerge the sterilizer in water or let water get into the electrical parts.
- Regularly descale the sterilizer to remove mineral buildup and ensure proper sterilization.
- Check the sterilizer often for signs of damage or wear, and promptly replace any broken or worn-out parts.
- Keep kids and pets away from the sterilizer to prevent accidents or damage.
Please refer to the "CARE & MAINTENANCE" section in the BOLOLO BL1001 Baby Bottle Sterilizer Instruction Manual for more detailed instructions and safety precautions.
Add New Comment