User Manual Q&AAnswer
Jul 01, 2024 - 11:19 PM
To charge the battery of the Phanpy AM7134 Double Electric Breast Pump, please follow these steps:
1. Before using the lithium polymer battery for the first time, make sure to fully charge the pump using the charging wire that comes with it.
2. Connect one end of the charging wire to the charging port located on the breast pump.
3. Plug the other end of the charging wire into a power source, such as a wall outlet or a USB port on a computer.
4. Once connected, the LED indicator on the breast pump will light up, indicating that the charging process has started.
5. Allow the battery to charge fully. It may take a few hours to reach a full charge, depending on the current battery level.
6. Once the battery is fully charged, disconnect the charging wire from the breast pump and the power source.
7. The breast pump is now ready to be used. Press the power button to turn it on and start your pumping session.
Note: It is recommended to fully charge the battery before using the breast pump for the first time and to recharge it when the battery level is low to ensure optimal performance.
Add New Comment