User Manual Q&AAnswer
Jul 01, 2024 - 10:53 PM
To charge the Mydethun YQD12 3D Moon Lamp, follow these steps:
1. Connect the USB charging cable to a power source, such as a computer, wall adapter, or power bank.
2. Insert the other end of the USB charging cable into the charging port located on the bottom of the moon lamp.
3. Ensure that the lamp is placed on a flat surface or the wooden stand to prevent it from rolling or falling.
4. The lamp will start charging once it is connected to a power source. You can check the charging status by observing the LED indicator on the lamp. The LED indicator will turn red when the lamp is charging and will turn off once it is fully charged.
5. It is recommended to fully charge the lamp before using it for the first time. The charging time may vary, but it usually takes around 2-3 hours to fully charge the lamp.
6. Once the lamp is fully charged, you can disconnect it from the power source and enjoy its wireless operation.
Please refer to the instruction manual provided with your Mydethun YQD12 3D Moon Lamp for more detailed information on charging and usage instructions.
Add New Comment