User Manual Q&AAnswer
Jun 22, 2024 - 05:24 AM
To adjust the color temperature and brightness of the SIBRILLE FLH-036-F1 LED Tree Floor Lamp, you can use either the remote control or the touch controls on the lamp.
Using the Remote Control:
1. Make sure the lamp is plugged in and turned on.
2. Point the remote control towards the lamp.
3. Press the "Color Temp" button on the remote control to cycle through the available color temperature options: warm white, cool white, and daylight white.
4. Press the "+" or "-" buttons to adjust the brightness level. The brightness can be adjusted from 10% to 100%.
Using the Touch Controls:
1. Make sure the lamp is plugged in and turned on.
2. Locate the touch controls on the lamp. They are usually located on the lamp head or the lamp pole.
3. Tap the "Color Temp" button on the touch controls to cycle through the available color temperature options: warm white, cool white, and daylight white.
4. Slide your finger along the touch controls to adjust the brightness level. Slide upwards to increase brightness and downwards to decrease brightness. The brightness can be adjusted from 10% to 100%.
Note: Each light on the lamp can be controlled individually, allowing you to set different color temperatures and brightness levels for each light. This gives you more flexibility in creating the desired lighting ambiance.
For more detailed instructions and illustrations, please refer to the user manual provided with the SIBRILLE FLH-036-F1 LED Tree Floor Lamp.
Add New Comment