User Manual Q&AAnswer
Jun 22, 2024 - 04:28 AM
Assembling the Brightech BT-FL-TRLG-MRBL-OBB Trilage Arc Floor Lamp is a straightforward process. Here are the step-by-step instructions:
1. Start by unpacking all the components from the package, including the lamp base, lamp arms, lamp heads, LED bulbs, and assembly instructions.
2. Place the lamp base on a flat and stable surface. Ensure that the surface is even to prevent any wobbling or instability.
3. Attach the lamp arms to the lamp base. Each arm has a corresponding slot on the base. Insert the arm into the slot and firmly push it in until it locks into place. Repeat this step for all three arms.
4. Once the arms are securely attached, attach the lamp heads to the ends of each arm. The lamp heads should easily slide onto the arms and click into place. Make sure they are firmly attached.
5. After attaching the lamp heads, insert the provided LED bulbs into each lamp head. Twist the bulbs clockwise until they are securely in place.
6. Once all the components are assembled, adjust the arms and lamp heads to your desired position. The arms can be moved up or down, and the lamp heads can be angled to direct the light where needed.
7. Finally, plug the lamp into a power outlet and use the footswitch to turn it on and off.
Note: If you encounter any difficulties during the assembly process, refer to the included assembly instructions for additional guidance.
Add New Comment