User Manual Q&AAnswer
Jun 20, 2024 - 05:12 AM
To connect the YHW 24W-WFFL-BLACK WiFi Remote Modern Tall Standing Light to your WiFi network, please follow these steps:
1. Make sure your phone's Bluetooth is turned on and the light is powered on.
2. Open the Surplife app and tap the "+" icon at the top right corner.
3. Tap on the device from the list, then select your WiFi network (only 2.4GHz) and enter the password.
4. If the floor lamp cannot be found, try resetting the lamp by holding the button on the lamp rod for 15 seconds until the lamp flashes.
Note: WiFi and Bluetooth connections cannot be connected simultaneously. Please reset the device first when switching the connection method.
If you are still experiencing issues, please refer to the user manual for further troubleshooting steps.
Add New Comment