User Manual Q&AAnswer
Jun 20, 2024 - 04:06 AM
To install the Brightech SLR-27NH-SW-FL Remote Control Outdoor String Lights, please follow these steps:
1. Determine the desired location: Choose the outdoor area where you want to install the string lights. Make sure there is access to a power source nearby.
2. Mount the solar panel: Find a spot where the solar panel can receive direct sunlight. Use the provided stake or clip to secure the solar panel in place. Ensure that it is facing the sun for optimal charging.
3. Install the string lights: Attach the mounting hardware to the desired location, such as a pergola, gazebo, or porch. Make sure it is securely fastened.
4. Connect the string lights: Connect the string lights to the mounting hardware or hooks. Ensure that the connection is secure.
5. Turn on the lights: Locate the on/off switch on the solar panel and turn it on. The lights will automatically turn on at night and off during the day, thanks to the built-in sensor.
6. Adjust settings with the remote control: Use the included remote control to adjust the brightness, select lighting modes (steady on, flashing, fading), and set timers according to your preference.
Note: If the lights do not turn on, ensure that the solar panel is receiving sufficient sunlight. Reposition the solar panel or replace the batteries if necessary.
For more detailed instructions and troubleshooting tips, please refer to the user manual included with your purchase.
Add New Comment