User Manual Q&AAnswer
Jun 15, 2024 - 04:10 AM
Installation of the Hykolity HY-WL-SQLED10W4K-1 20 Inch Outdoor Wall Lights is relatively straightforward. Here are the step-by-step instructions:
1. Attach the MOUNTING RING to the JUNCTION BOX using JUNCTION BOX SCREWS.
2. Connect the black wire from the fixture to the black supply wire.
3. Connect the white wire from the fixture to the white supply wire.
4. Attach the fixture ground wire to the MOUNTING RING with the green GROUND xxxx . Then connect it to the supply ground wire with a WIRE CONNECTOR.
5. Attach the FIXTURE to the MOUNTING RING through SCREWHOLES as shown, and secure it.
6. Install the BULB (not included). Refer to the relamping label at the socket area or packaging for the maximum allowed wattage.
Please note that these are general installation instructions. It is always recommended to refer to the specific instructions provided in the user manual that came with your product for accurate and detailed installation steps.
If you need further assistance or have any other questions, please refer to the user manual or contact Hykolity customer service at 1-888-123-4567 or support@hykolity.com.
Add New Comment