User Manual Q&AAnswer
Jun 15, 2024 - 04:05 AM
Installing the Uigos C-063 Smart Sensor Dusk Night Light is a simple process. Here are the steps to follow:
1. Choose a suitable location: Select a standard electrical outlet where you want to install the night light. Ensure that the outlet is easily accessible and provides optimal coverage for the desired area.
2. Plug in the night light: Insert the Uigos C-063 Smart Sensor Dusk Night Light into the selected electrical outlet. Make sure it is securely plugged in.
3. Position the night light: Adjust the position of the night light to ensure it can detect ambient light levels effectively. This will enable the automatic on/off functionality based on the surrounding light conditions.
4. Test the night light: Wait for the room to darken or cover the sensor to simulate low-light conditions. The night light should automatically turn on. If it doesn't, check if the outlet has power, ensure the ambient light is low enough for activation, and verify that the night light is properly plugged in.
5. Adjust as needed: If necessary, you can relocate the night light to optimize its effectiveness based on your specific needs. Experiment with different positions to find the best lighting coverage.
Please refer to the user manual for additional information and troubleshooting tips.
Add New Comment