User Manual Q&AAnswer
Jun 15, 2024 - 03:57 AM
Installation Steps:
1. Before beginning installation, make sure all parts are present. If any part is missing or damaged, do not attempt to install the product.
2. Plug the base E into the fastener back of the solar panel A.
3. Place the nut B in the groove on one side of the fastener.
4. Insert studs on the other side C and tighten.
5. Connect the string light D with the solar panel A.
6. Press the button as shown in the figure, and then cover the solar panel to test whether the string light can normally light up.
Please refer to the user manual for visual illustrations of the installation steps.
Note: It is important to turn on the switch and cover the solar panel to check whether all the bulbs are on normally before installation. If any issues are encountered, please contact customer support for assistance.
For a more detailed guide, you can also refer to the installation video provided in the user manual. Simply scan the QR code or contact customer support if the QR code is not working.
Remember to keep the solar panel away from other light sources and ensure it receives sufficient sunlight or charge it via USB for 8 hours before the first use.
Add New Comment