User Manual Q&AAnswer
Jun 15, 2024 - 03:48 AM
Installation of the Emliviar OS-1803CW1 Exterior Wall Lamp Light is relatively straightforward. Here are the step-by-step instructions:
1. Gather all the necessary tools and components: Make sure you have the lamp fixture, mounting hardware (screws, anchors, etc.), and the installation instructions provided in the package.
2. Choose the installation location: Select a suitable exterior wall area where you want to mount the lamp. Ensure that there is a power source nearby for connection.
3. Turn off the power: Before starting the installation, turn off the power supply to the area where you will be working. This will ensure your safety during the installation process.
4. Mark the mounting holes: Hold the lamp fixture against the wall in the desired position. Use a pencil or marker to mark the locations of the mounting holes on the wall.
5. Drill pilot holes: Using an appropriate drill bit, drill pilot holes at the marked locations on the wall. Make sure the holes are the correct size for the mounting hardware provided.
6. Attach the mounting bracket: Align the mounting bracket with the drilled pilot holes and secure it to the wall using the provided screws and anchors. Ensure that the bracket is level and securely attached.
7. Connect the wiring: Follow the manufacturer's instructions for connecting the wiring. Typically, this involves connecting the wires from the lamp fixture to the corresponding wires in the electrical junction box. Make sure to use wire connectors or electrical tape to secure the connections.
8. Attach the lamp fixture: Align the lamp fixture with the mounting bracket and secure it in place using the provided screws. Ensure that the fixture is securely attached and level.
9. Test the installation: Once the lamp fixture is securely installed, turn on the power supply and test the light to ensure it is functioning properly.
Please note that these instructions are a general guide, and it is essential to refer to the specific installation instructions provided by the manufacturer for the Emliviar OS-1803CW1 Exterior Wall Lamp Light.
Add New Comment