User Manual Q&AAnswer
Jun 15, 2024 - 03:39 AM
To assemble the Bellababy BLA8042 Wearable Breast Pump, follow these steps:
1. Pull up and detach the Hub from the milk collector.
2. Take off the silicone flange from the milk collector.
3. Pull out the connector from the milk collector with a little force.
4. Detach the membrane and valve from the connector.
To reassemble the pump:
1. Set the membrane and valve onto the connector.
2. Insert the connector into the milk collector, ensuring that the ears of the connector are completely buckled into the indention in the milk collector.
3. Attach the silicone flange to the milk collector, making sure that the indention on the flange matches the vent on the milk collector.
4. Pinch and press the silicone flange edge all around to ensure it is attached to the milk collector closely and tightly, with no air leaks.
5. Connect the Hub with the milk collector, paying attention to the direction. The charging port on the Hub should be facing outward.
For further assistance with assembling the Bellababy BLA8042 Wearable Breast Pump, please contact the Bellababy service team at Service-US@Bellababy-med.com.
Add New Comment