User Manual Q&AAnswer
Jun 15, 2024 - 03:34 AM
To assemble the Bellababy BLA-8021 Pocket Electric Breast Pump, please follow these steps:
1. Insert the massage cushion into the shield tightly.
2. Set the cylinder into the tee joint tightly, then press the cylinder cover closely to ensure there is no air leakage.
3. Set the valve on the round bulge in the tee joint tightly. Be careful as the valve is flimsy and may get damaged if not handled properly. If you are using a single pump, just insert the branched tube into the tubing joint.
4. xxxx the bottles into the tee joint and connect them to the machine using the tubing tightly.
Note: Make sure the tubing is inserted into the suction hole on the right side of the machine, not the recharging hole on the left side.
For a visual reference, please refer to the "Assembly Steps" section in the Bellababy BLA-8021 Pocket Electric Breast Pump User Manual.
If you have any further questions or need additional assistance, please refer to the user manual or contact the Bellababy customer service team for support.
Add New Comment