User Manual Q&AAnswer
Jun 14, 2024 - 12:57 AM
To adjust the temperature and time settings on the , follow these steps:
1. Press the power button to turn on the appliance. The power light will be on.
2. Choose the desired function by pressing the corresponding function button. The available functions are: FAST, 24H, THAW, FOOD, and STERILIZE.
3. Once you have selected a function, the icon for that function will start flashing on the screen.
4. To adjust the temperature, wait for the temperature indicator to start flashing. Press the function button again to switch between adjusting the temperature and adjusting the time. Use the "+" and "-" buttons to increase or decrease the temperature as desired.
5. To adjust the time, wait for the timer indicator to start flashing. Press the function button again to switch between adjusting the time and adjusting the temperature. Use the "+" and "-" buttons to increase or decrease the time as desired.
6. After you have set the desired temperature and time, the bottle warmer will start working. The corresponding function indicator will keep flashing, and the timer indicator will count down.
7. Once the countdown is complete, the bottle warmer will beep 5 times to indicate that it has finished. The device will then enter standby mode.
Note: The adjustable range of temperature and time may vary depending on the selected function. Refer to the user manual for specific temperature and time ranges for each function.
If you have any further questions or issues, please refer to the HEYVALUE N2T Baby Bottle Warmer user manual or contact HEYVALUE customer support for assistance.
Add New Comment