User Manual Q&AAnswer
Jun 14, 2024 - 12:55 AM
To install the STAR-SPANGLED US-21B-WH3 2.8-inch Motion Sensor Light, follow these steps:
1. Choose the desired location for the light. It can be installed on any surface, thanks to the customized super strong adhesive tape included in the package.
2. Clean the mounting surface thoroughly to ensure proper adhesion.
3. Remove the backing from the adhesive tape on the back of the light.
4. Press the light firmly onto the mounting surface, making sure it is securely attached.
5. Once installed, turn on the light using the power switch.
6. Adjust the motion sensor settings as needed. The motion sensor has a detection range of 16 feet and a 120° sensor angle.
7. The light will automatically activate when motion is detected within its range and turn off after 20 seconds of no motion to conserve battery life.
Note: It is important to ensure the area is dark for the light sensor to activate properly. Also, replace the batteries when necessary to maintain optimal performance.
For more detailed instructions and illustrations, please refer to the STAR-SPANGLED US-21B-WH3 2.8-inch Motion Sensor Light User Manual included in the package.
Add New Comment