User Manual Q&AAnswer
Jun 11, 2024 - 12:54 AM
Installing the MAZ-TEK Warm White LED Nightlights is a simple process. Here are the step-by-step instructions:
1. Identify the location: Choose the area where you want to install the nightlights. It can be a bedroom, hallway, bathroom, or nursery.
2. Locate a standard AC 110V outlet: Ensure that there is a standard AC 110V outlet available near the desired installation location.
3. Plug in the nightlights: Insert the MAZ-TEK Warm White LED Nightlights into the standard AC 110V outlet. Make sure the prongs are fully inserted and secure.
4. Position the nightlights: Once plugged in, position the nightlights in a way that provides the desired illumination. You can adjust the angle of the nightlights to achieve the desired coverage.
5. Test the automatic activation: The MAZ-TEK Warm White LED Nightlights have a built-in light sensor that automatically turns them on at dusk and off at dawn. To test this feature, cover the light sensor with your hand or a piece of cloth to simulate darkness. The nightlights should turn on. Remove the cover from the light sensor, and the nightlights should turn off.
Note: If the nightlights do not turn on or off automatically, please refer to the troubleshooting section in the user manual or contact MAZ-TEK customer service for assistance.
By following these steps, you should be able to successfully install and use the MAZ-TEK Warm White LED Nightlights in your desired location.
Add New Comment